Installation instructions
Introduction
The CYCLIX hanger is designed for a maximum load of 32 kg. In order to support the load, it is important that the selected wall is able to support the given load. It is recommended to use brick or concrete walls with a minimum thickness of 150mm and wooden walls with a minimum thickness of 100mm.
Set contains
1 x Wall Hook
2 x Wheel support
2 x Wall washer
7 x Screw
7 x expansion plug
7 x Blanking plug
1 x User Manual
1 x Gift Box
Installation
- Determine the position in which the bike should be suspended. Make sure there is enough space in each direction.
- Hold the pedal hook in the designated location and use it as a template to mark the locations for the holes. Make sure the hook is straight, you can use a spirit level.
- Drill the holes with an 8mm drill bit to a depth of 55-65mm. Use a 4mm twist drill for wooden walls.
CAUTION Before drilling, make sure that no high voltage, gas or water lines are installed behind the wall.
Push the dowels into the drilled holes so that they form a flat surface with the wall, you can use a hammer to gently tap the dowels. Do not use dowels for wooden walls, just screw the handle directly to the wall with a screwdriver. - Hang the bike with the pedal. If it tilts forward, take the bracket and place it under the front wheel to keep the bike balanced. Use a pencil to mark the places for the holes.
- Drill the holes in the same way as you did previously when installing the hook and attach the bracket.
Repeat steps 5 and 6 to assemble the rear bracket in the same way.
If your bike doesn’t tip forward when suspended from the towbar, you don’t need to use the brackets. In this case, use protective washers and stick them where the tire touches the wall.
Security tip
Do not perform any service work on the hanging bike, nor get on the hanging bike!
Technical Specifications
Hook dimensions 50mm x 80mm x 126mm
Bracket dimensions 45mm x 45mm x 130mm
Material: S235 steel
Thickness: 4mm (hook) 3mm (bracket)
Max. load: 32 kg
Finish: Powder coating
Color: Black mat RAL9005